MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual page 82

To insert a table:
Place the insertion point in your draft where you want the table to appear.
1
Do one of the following to open the Insert Table dialog box:
2
•
Click the Insert Table button in the toolbar.
•
Select Insert > Table.
•
Select Table > Insert > Table.
The Insert Table dialog box appears.
Enter the number of rows and columns you want, or accept the defaults for a table with three
3
rows and three columns.
Change table properties as desired:
4
•
Table width indicates how wide the table is.
Select Default width for a table with columns that resize as you add content. Select Specific
width if you want to enter a number for a fixed table width. Use the pop-up menu to indicate
whether the number you enter is in pixels, or is a percent of the page you want the table to be.
•
Border thickness is the thickness of the border around the table and between cells.
Tip: Enter 0 if you do not want a table border.
•
Cell padding indicates the amount of space, in pixels, between the edge of the table cell and
the content of the cell.
Note: If you do not enter a value, Contribute sets cell padding to the default value, which is 1 pixel.
•
Cell spacing indicates the amount of space, in pixels, between each table cell.
Note: If you do not enter a value, Contribute sets cell spacing to the default value, which is 3 pixels.
82 Chapter 8