Changing Properties For A Horizontal Rule - MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual

To delete a horizontal rule:
In your draft, click the horizontal rule to select it.
1
Press Delete.
2

Changing properties for a horizontal rule

You can customize the height, width, and shading applied to a horizontal rule on a page. By
default, a horizontal rule in Contribute is 1 pixel high, expands to the width of the page or table
cell in which it is inserted, and has a small drop shadow (or shading) applied.
For information about adding and deleting horizontal rules to a page, see "Adding and deleting a
horizontal rule" on page 78.
To set horizontal rule properties:
In your draft, click the horizontal rule to select it, then do one of the following:
1
•
Right-click the horizontal rule, then select Properties.
•
Select Format > Horizontal Rule Properties.
The Horizontal Rule Properties dialog box appears.
Change any of the following options:
2
•
Width indicates the length of the line.
To set a specific line width for a horizontal rule, enter a number in the Width text box, then
select Pixels. To set a line width that expands or contracts depending on the width of a viewer's
browser window, enter a number between 1 and 100 in the Width text box, then select
Percentage.
•
Height indicates the height of the line.
•
Use Outline Shading indicates that the line appears as an outline, not a solid line.
Click OK.
3
Contribute changes the horizontal rule properties.
Working with Images and Graphical Elements 79