Editing Links; Changing Link Text And Destination - MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual

Editing section anchors
After you create a section anchor, you can change the section anchor name or you can delete the
section anchor.
Note: If you edit a section anchor, links to that anchor will be broken until you fix the link on the page that links to the
section anchor.
To add a section anchor to a page, see "Adding a section anchor" on page 113. To link to section
anchor, see "Linking to a section anchor" on page 113.
To edit a section anchor name:
In your draft, select the anchor, then do one of the following:
1
•
Double-click the section anchor.
•
Right-click, then select Anchor Properties from the pop-up menu.
•
Select Format > Anchor Properties.
The Edit Section Anchor dialog box appears.
Change the anchor name.
2
Click OK.
3
To delete a section anchor:
•
In your draft, select the section anchor, then press Delete.

Editing links

You can edit an existing link to change the link's text or destination, remove a link, or change
link properties.
This section covers the following topics:
•
"Changing link text and destination" on page 115
•
"Removing a link" on page 116
•
"Changing link properties" on page 116

Changing link text and destination

After you insert a link, you can later change link text or change the page that the link opens.
To change link text:
In your draft, select the link text you want to change.
1
Type new text.
2
Working with Links 115