MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual page 61

To change text font:
In your draft, select the text you want to change
1
Do one of the following:
2
•
Select a font from the Font pop-up menu in the toolbar.
•
Right-click, select Font, then select a font from the pop-up menu.
Note: This option is not available if you are working in a table.
•
Select Format > Font, then select a font from the pop-up menu.
Editing the font list
Font combinations in the Contribute font list determine how a browser displays text in your web
page. Each font you see in the Font menu represents the first font in that font combination. You
can edit the font combinations in Contribute.
A browser uses the first font in a font combination that is installed on the website visitor's
computer; if none of the fonts in the combination are installed, the browser displays the text as
specified by the visitor's browser preferences.
To edit the font list:
In your draft, select Format > Font > Edit Font List, or select Edit Font List from the Style
1
pop-up menu in the toolbar.
The Edit Font List dialog box appears.
Select a font combination in the Font list section.
2
The fonts in the selected combination appear in the Chosen fonts section. The Available fonts
section lists fonts that are installed on your computer.
Choose from the following options:
3
•
To add or remove a font combination, click the Plus (+) and Minus (–) buttons above the Font
list.
•
To move a font combination up or down in the list, click the arrow buttons above the Font list.
•
To add or remove fonts from a font combination, click the arrows button (<< or >>) between
the Chosen fonts and the Available fonts.
Working with Text 61