Removing A Link; Changing Link Properties - MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual

To change link destination:
In your draft, select the link you want to edit, then right-click and select Link Properties from
1
the pop-up menu.
The Insert Link dialog box appears.
If you want to change the type of page you link to, click a button at the top of the dialog box;
2
otherwise, skip this step.
Select or browse to a new file.
3
Click OK.
4

Removing a link

After you insert a link, you can easily remove the link from your text or image.
To remove a link:
Browse to the page with the link, then click the Edit Page button in the toolbar.
1
Select the link you want to remove.
2
Do one of the following:
3
•
Select Format > Remove Link.
•
Right-click, then select Remove Link from the pop-up menu.
•
Press Delete.
The link text or image on the draft is no longer a link.

Changing link properties

You can change any of the following link properties:
•
Link text (see "Changing link text and destination" on page 115)
•
Linked file, web page, or e-mail (see "Changing link text and destination" on page 115)
•
Web address (see "Setting the advanced linking options" on page 110)
•
Anchor (see "Linking to a specific place in a page" on page 112)
•
Target (see "Setting a target for your page" on page 111)
To change link properties:
In your draft, select the link you want to edit.
1
Do one of the following:
2
•
Select Format > Link Properties.
•
Right-click, then select Link Properties.
The Insert Link dialog box appears.
Make changes as necessary, then click OK.
3
116 Chapter 9