Change The Camera Angle To A Preset Position - Canon VB-M40 Administrator's Manual

Use Pan/Tilt/Zoom from the Video Window
You can also use the pan/tilt/zoom feature from the video
window.
➀
➀ Display area
Drag on the area to change the camera angle. Click on
the area to move the camera angle to that point.
➁ Zoom slider
Change the zoom position using the slider or [+]/[-].
Click [+] or drag the slider up to move to the telephoto
position. Click [-] or drag the slider down to move to the
wide-angle position.
Pan/tilt/zoom is unavailable.
• Pan/tilt is unavailable.
• Zoom is unavailable when the camera's digital zoom is
set to [Disable].
➁
Change the Camera Angle to a Preset
Position
You can select a preset camera angle in the [Camera
Control] dialog box after getting control of a camera.
Note
You must first configure the presets on the camera before using
this feature. For details, see camera manual.
Operate the Camera
6
6
-9