Configure The Video Window Layout; Create A Layout; Place A Video Window - Canon VB-M40 Administrator's Manual

Configure the Video Window Layout

You can save the size and position of a video window in
the Viewer as a layout.
Configure a layout using the following procedure:

1. Create a layout

2. Place a video window

3. Save the layout
Note
When the Viewer starts, it displays the layout that was being
displayed when the program last ended. A new layout with the
name "Untitled1" is opened the first time the Viewer is started.
You can save the layout with a name after you place a video
window.
Create a Layout
Specify the layout name, layout background and the video
window display conditions and open it as a new layout.
1 Click [Layouts] > [New Layout] to display the [New
Layout] dialog box.
Configure each item.
2
➀
➁
➂
➀ [Layout Name]
Enter the name of the layout.
➁ [Background]
This cannot be used with RM-Lite.
➂ [Playback Options]
This cannot be used with RM-Lite.
➃
➃ [OK] and [Cancel]
Close the dialog box.
Click [OK] to close the dialog box.
3
Important
Following the above steps does not automatically save the
layout. Be sure to enter a name and save the new layout after
configuring it.
Place a Video Window
You can place a video window anywhere in the viewing
area.
You can arrange video windows according to a grid.
Display a Grid
1 Click [Grids] on the toolbar.
Select the type of grid.
2
• [None]
Do not display a grid.
• [Alignment]
Display a dotted grid.
• [160x120] / [320x240] / [640x480]
Display a solid grid with one of three sizes.
• [Custom]
This cannot be used with RM-Lite.
4
4
-11