Event Information - Canon VB-M40 Administrator's Manual

Code
12017 The operation was canceled, usually because the handle on
which the request was operating was closed before the
operation completed.
The attempt to connect to the server failed.
12029
12030 The connection with the server has been terminated.
12031 The connection with the server has been reset.

Event Information

Event Information
Record Now
Recording
Change in the recording frame rate
Low Disk Space Warning
Delete recorded files (when disk space is insufficient) [Delete recorded files (when disk space is insufficient) started] or [Delete
Delete recorded files (when disk space is low)
Suspending/Resuming Recording
Camera Communications Error
Storage Server Starting/Stopping
Error Message
[Manual Recording Started] or [Manual Recording Stopped]
[Recording Started] or [Recording Stopped]
[Recording Frame Rate reduced due to high load issues] or [Reverted to the
Recording Frame Rate due to resolution of high load issues]
[Warning: Files deleted due to low disk space]
recorded files (when disk space is insufficient) stopped]
[Delete recorded files (when disk space is low) started] or [Delete recorded files
(when disk space is low) stopped]
[Recording Suspended] or [Fixed: Recording Resumed]
[Error: Cannot Connect to Camera] or [Connection to Camera Fixed]
[Storage Server Started] or [Storage Server Stopped]
Possible Cause
The communication was canceled. (This error does not
indicate a problem and may be generated during normal
operation.)
The connection to the camera failed. (Normally, 12002 is
generated.)
The connection to the camera has been aborted. (The
disconnect process itself is recorded when it executes
normally.)
The connection to the camera has been reset.
Displayed Message
9
9
-9