Set Up Camera Position And Saved Video - Canon VK-16 User Manual

Using the Add Camera Server Dialog

Set up camera position and saved video

The Add Camera Server dialog allows you to set a camera thumbnail image for the Viewer
and to choose a Storage Server for recorded video.
The dialog shown below illustrates an example VB-C10 setup. It could also
represent a VB-C50i, VB-C50iR, VB-C50FSi, VB-C50Fi, VB101 and VB150 with only one
camera setup or in a single mode.
Connection Settings
Set the Storage Server for saved
video, or select 'Do not record'.
Note
52
Adjust camera angle
One or more inputs may
show. The states for these
can be 'inverted'.
The Viewer does not store its own names for camera
servers or sensors. It displays names which are configured and
stored on the Camera Server. Please refer to your VB User's
Manual for more details on setting names.
These settings specify information about recording. To initiate
recording, refer to Chapter 6 for configuring recording
schedules.
Set backlight compensation.
Select a drive on the Storage
Server to save video.