Operate The Camera; Get Control Of A Camera; Use The Pan/Tilt/Zoom Feature - Canon VB-M40 Administrator's Manual

Operate the Camera

You can change the camera angle or adjust the image
quality for a camera in the video window.

Get Control of a Camera

Click the video window.
1
Click [Window] > [Camera Control] to display the
2
[Camera Control] dialog box.
➀
➁
➂
➃
➀ Camera angle control buttons
Change the camera angle.
➁ [Select Preset]
Moves the camera to a preset position.
➂ [Panorama]
Displays the [Panorama] window. Move the camera to
a position using the panorama image.
➃ [Control]/[Release]
Get or release control of the camera.
➄ Zoom slider
Drag to change the zoom position. Drag up to move to
the telephoto position and down to move to the wide-
angle position.
➅ [Advanced]
Configure the camera's advanced settings.
3 Click [Control].
You now have control of the camera for a certain
period.
6
-8
Note
• If the camera is idle for one minute, camera control is released
automatically. A count down message is displayed 10 seconds
before the release. If you want to keep control of the camera,
click the video window.
• If you want to move the video window while you are in control
of the camera, drag the title bar.
• You can also control the camera while recording. If the camera
angle to be used during recording has been set, the camera
returns to the set position when the Viewer releases camera
control.

Use the Pan/Tilt/Zoom Feature

Use the Pan/Tilt/Zoom Feature in the [Camera
Control] Dialog Box
➄
You can use the pan/tilt/zoom feature in the [Camera
Control] dialog box after getting control of the camera.
➅
➀
➀ Camera angle control buttons
Change the camera angle by clicking the buttons.
Click
➁ Zoom slider
Drag the slider to change the zoom position.
Drag the slider up to move to the telephoto position
and down to the wide-angle position.
➁
in the center to point the camera to the front.