Disk Space Management (Important) - Canon VB-M40 Administrator's Manual

Disk Space Management (Important)

The Storage Server monitors the disk space and responds
according to the amount of available space.
Disk Space Status
Notification level indicating
that the remaining disk space
is low
Threshold level
Limit level
Action When the Low Remaining Disk Space
Notification Level is Reached
The Storage Server issues an event when the disk space
available for recording (i.e. available space relative to the
maximum disk space used) goes below a certain level.
If [Maximum Disk Space Used] is not set, the drive
capacity of the disk that stores the recording file is
considered to be the maximum disk space.
Value for
[Maximum Disk
Space Used]
7
-4
Explanation
You can specify a reference
value using [Low Disk Space
Warning Level] on the
[Recording Settings] tab in
the [Storage Server Group
Settings] dialog box.
The Storage Server calculates
a reference value based on
various conditions and
settings.
Notification
level
Low Remaining Disk Space Notification Level
Conditions and Calculation Method
If one of the following conditions is met, a low remaining
disk space notification level is indicated.
Condition 1: If the Storage Server disk space usage
exceeds the following values:
M x (100 - A)/100
(M: Value specified in [Maximum Disk Space
Used], A: Value specified in [Low Disk Space
Warning Level])
For example, if the value for [Maximum Disk Space
Used] is 100 GB and the value for [Low Disk
Space Warning Level] is 10%, the Storage Server
reaches the low remaining disk space notification
level when the remaining free disk space becomes
10 GB or less.
Condition 2: If the free disk space falls below the
following values:
Disk space x A/100
(A: Value specified in [Low Disk Space Warning
Level])
For example, if the disk space is 80 GB and the
value for [Low Disk Space Warning Level] is 10%,
the Storage Server reaches the low remaining disk
space notification level when the remaining free
disk space becomes 8 GB or less.
Note
If other applications use the same hard disk, you need to
consider condition 2. Even if the Storage Server uses a small
amount of disk space, it may reach the low remaining disk space
notification level according to condition 2 because other
applications have consumed a portion of the disk space.
Calculation Example
Disk Drive D Drive
Disk Space 100 GB
Free Disk Space 50 GB
Value for 40 GB
[Maximum Disk
Space Used]
Value for Low Condition 1:
Remaining Disk 40 GB x (100-10)/
Space Notification 100 = 36 GB
Level Condition 2:
100 GB x 10/100 =
10 GB
E Drive
200 GB
200 GB
200 GB
Condition 1:
200 GB x (100-10)/
100 = 180 GB
Condition 2:
200 GB x 10/100 =
20 GB