Remove A Camera - Canon VB-M40 Administrator's Manual

Change the Thumbnail Image of a Camera
You can change the thumbnail image of a camera.
In the [<camera name> Properties] dialog box, click the
[General] tab and click [Update] to display the
[Thumbnail] dialog box.
➀
➁
➂
➃
➀ Preview image
Drag the slider to change the zoom position of the
camera. Click in the preview image to change the
camera position.
➁ [Select Preset]
Select a preset image stored on the camera.
➂ [Update]
Use the current preview image as the camera
thumbnail image. The [Thumbnail] dialog box closes
and the camera thumbnail image is updated.
➃ [Cancel]
Close the dialog box without updating the thumbnail
image.
You cannot use the pan/tilt/zoom feature.
• You cannot use the pan/tilt feature.
• You cannot use the zoom when the digital zoom is set
to [Disabled] on the camera.
Note
You must configure the presets first before starting operation. For
details, see the camera manual.

Remove a Camera

Select a camera in the list of cameras on the
1
[Cameras] tab.
Click [Remove].
2
3 A message is displayed asking if you want to remove
the camera. Click [Yes].
Important
If you remove a camera, you will no longer be able to play back
recordings made with the camera. If you need to play back the
recordings, use [Disable Camera] on the [Advanced] tab
instead of removing the camera.
Add a Camera
3
3
-11