Compensate For Dark Regions In The Image - Canon VB-M40 Administrator's Manual

Network video recording software rm-lite ver.1.0 administrator's manual rm series
Hide thumbs Also See for VB-M40:
Table of Contents

Advertisement

Silence Detection Settings
Select the [Use silence detection to reduce network
traffic] check box on the [Audio] panel to set the silence
detection sensitivity.
Click [Settings] to display the [Silence Detection Settings]
dialog box and adjust the silence detection sensitivity.
➀ [Use the default sensitivity settings]
Uses the default sensitivity for silence detection.
➁ [Set the sensitivity manually]
Drag the slider to set the detection sensitivity.
➂ [OK] and [Cancel]
Close the dialog box.

Compensate for Dark Regions in the Image

Use the viewer shade control to compensate for any dark
regions in the image.
Click the video window menu button to display the
1
menu.
Click [Viewer Shade Control] and select the amount of
2
shade from the submenu.
• [Off]
Disable the shade control.
• [Low]/[Medium]/[High]/[Very High]
Enable the shade control. View the video window and
select a compensation value that gives the appropriate
brightness.
Note
• You cannot apply this feature to more than one video window.
• The viewer shade control is a feature of the Viewer, not the
camera. Therefore, it can be used for both live image and
recorded image playback.
Operate the Camera
6
6
-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-m600dVb-m600veVb-m700fRm-lite 1.0

Table of Contents