Canon VB-C300 Administrator's Manual page 141

If the following warning appears, change the settings according
to the tables below.
Note
Warning example
* The tour time depends on the settings.
Click Cancel to return to the setting screen.
Click OK to save the current settings.
(If you are using the Preset Setting Tool, click Save on the setting page of the tool)
Endurance of VB-C50i and VB-C300's pan/tilt mechanisms are
approximately 100,000 round trips at the full range. The total tour
time depends on the combination of the movement rate,
movement range, and still time. Refer to the following tables.
Total tour time for 100,000 round trips in the pan direction (estimated).
Movement rate (PT) is 1.
Movement range in the
Still time
pan direction (angle)
(sec.)
50
0 3872
10 5666
20 7555
30 9444
Example: If the movement rate (PT) is 1, still time is 30 seconds,
and movement range (angle) in the pan direction is 50
degrees, it takes approximately 9,444 hours for 100,000
round trips in the pan direction.
Endurance of VB-C60's pan/tilt mechanism is approximately
300,000 round trips at the full range.
Total tour time for 300,000 round trips in the pan direction (estimated).
Movement rate (PT) is 1.
Movement range in the
Still time
pan direction (angle)
(sec.)
±50
0 11616
10 17000
20 22666
30 28333
Movement rate (PT) is 2.
Still time
(sec.)
100 150
3825 3809
4722 4407
5666 5037
6611 5666
(Unit: Time)
Movement rate (PT) is 2.
Still time
(sec.)
±100 ±150
11475 11427 0
14166 13222 10
17000 15111 20
19833 17000 30
(Unit: Time)
Set Preset Tour
Movement range in the
pan direction (angle)
50 100
0 1983 1936 1920
10 3777 2833 2518
20 5666 3777 3148
30 7555 4722 3777
(Unit: Time)
Movement range in the
pan direction (angle)
±50 ±100 ±150
5950 5808 5761
11333 8500 7555
17000 11333 9444
22666 14166 11333
(Unit: Time)
4
150
141