Launch without Storage Server (Viewer Only Mode)
You can use the Viewer only without connecting to a Storage Server. When Storage
Server is not used, some functions are not available.
●
Use Viewer only
Functions not Available in Viewer Only Mode
When you launch the Viewer with Viewer Only Mode, the following functions are not available.
●
Viewing Screen
● Timeline is not displayed. Timeline under the View menu cannot be used.
● Capture Still Frame feature cannot be used.
● Search Events under the Edit menu cannot be used.
● Live Events under the View menu cannot be used.
● Shared Layouts are not displayed.
● In the Add Layout Sequence dialog, a type of layout is fixed to Personal Layout Sequence.
●
Configuration and Preference Screen
● Recording Schedules tab is not displayed (→ P. 105). Some functions such as video
recording, sensor events, and motion detection are not available.
● In the Storage and Camera Server Summary, Storage Servers tab is not displayed (→ P. 82).
● In the Storage and Camera Server Summary, the Camera Server list shows only
Camera Server, Locations / Zones and Type (→ P. 82).
● In the Add Camera Server and Edit Camera Server dialog, the following items are
gray (disabled):
Save Recorded Video on
●
Camera Server Settings
●
Camera Settings > Save video in
●
● In the Viewer Settings window (→ P. 166), items in the Event Notification Settings
area are gray (disabled).
Start the Viewer
Select Not use Storage
1
Server from the drop-down
menu.
Click Connect.
2
5
161