Launch Storage Server By Specifying The Ip Address - Canon VB-C300 Administrator's Manual

Launch VK Viewer and Display the Configuration and Preferences Screen

Launch Storage Server by Specifying the IP address

If you installed the Viewer and Storage Server on separate PC, specify an IP address of
Storage Server and connect Viewer to the Storage Server.
If you use a proxy server, you should change the Internet
option settings in the following procedure:
Note
1. Select Start > Control Panel > Network and Internet >
2. Select the Connection tab.
3. Click LAN settings.
If using a proxy server between a Viewer and a Storage Server,
it should not perform response buffering. The Proxy Server
which is configured to perform response buffering may lead to
delays in sending small amounts of data (such as events) from
the Storage Server to the Viewer. You cannot use the Apache
proxy server since it perform response buffering.
You cannot send or receive audio when using a proxy server.
The dialog for entering the IP address will also be displayed even
when connection to the Storage Server failed.
Tip
Internet Option.
Change the proxy server settings.
Select Use IP address from
1
the drop-down menu.
Click Connect.
2
Enter the IP address or host
3
name of the Master Storage
Server in Host Name or IP,
and the port number in Port.
Click Connect.
4
Enter your User Name and
5
Password, and then click
Login.
4
79