Upgrade Vk-64/Vk-16 - Canon VB-C300 Administrator's Manual

Upgrade VK-64/VK-16

This section describes how to upgrade previous versions of VK-64/VK-16.
●
Upgrade from Version1.0
Obtain the released version of v2.0 (you cannot use the upgrade program).
1
Back up the following folders that are in the Storage Server of v1.0.
2
<Installation folder for VK-64> \NVR\1.0\conf
<<Example>> C:\Program Files\Canon\Webview\NVR\1.0\conf
<All drives> :\WebView-NVR"
Please note that the capacity of this folder is large.
Install the new version.
3
If a failure occurs, restore the previous version by following "Procedure for Restoring
Previous Version" (➝ p. 248).
●
Upgrade from v1.1, 1.2, 1.3 and 1.4
Obtain the v2.0 upgrade program (free program).
1
Available from Canon Web site.
Back up the following folders that are in the Storage Servers of v1.1, v1.2, v1.3 and
2
v1.4.
Configuration file path for OS other than Windows Vista
<Startup drive for OS> :\Documents and Settings\All Users\Application Data\
<All drives> :\WebView-NVR"
Configuration file path for Windows Vista
<Startup drive for OS>:\ProgramData\Canon\WebView\NVR\
<All drives >:\WebView-NVR"
Install the new version by following the upgrade procedure described at our
3
WebView Product web page.
If a failure occurs, restore the previous version by following "Procedure for Restoring
Previous Version" (➝ P. 248).
Canon\Webview\NVR
8
245