Preparation And Precaution - Canon VB-C300 Administrator's Manual

Installation Procedures

Preparation and Precaution

●
Use NTFS-formatted hard disk
The hard disk where the software will be installed and video data will be stored should be
formatted in the NTFS.
You can convert the current hard disk into the NTFS format using the following command
at the command prompt.
"convert (Name of the drive):/fs:ntfs"
Example:
Tip
●
Stop other applications
You should stop other applications including anti-virus program before starting installation.
48
To convert Drive C into the NTFS format:
convert c:/fs:ntfs
Select All Programs, Accessories, and Command Prompt from
the Start menu to display the command prompt. If you press the
Enter key following the command shown above, a series of
questions appears, then conversion starts. Reboot the PC after
the process completes conversion. Any data on the hard disk is
not lost by conversion.