Upgrade From Version 1.0, 1.1, 1.2, 1.3 And 1.4 - Canon VB-C300 Administrator's Manual

Upgrade from Version 1.0, 1.1, 1.2, 1.3 and 1.4

If you upgrade the Viewer from an older version, all the settings are taken over to the new
version and video data recorded with older version can be played back with Version 2.0. It
is recommended to confirm your settings after the upgrading.
For the details, see "Upgrading VK-64/VK-16" (➝ P. 245).
If you are using VK-64/VK-16 with NAS server, you need to set
up log-on settings again after upgrading VK from v1.3 or 1.4 to
Note
v2.0.
Version 2.0 of the Viewer is able to connect to versions 1.2,
1.3, and 1.4 of the Storage Server. All of the versions are able
to be selected as the Master Storage Server. However, the
following functions are specific to version 2.0, and cannot be
used on previous versions of the Storage Server.
• VB-C60 registration
• Audio-related settings
• Retrieving summary information from a Storage Server
Viewer v2.0 cannot connect to the Storage Server v1.0 or v1.1.
Older version of Viewer cannot connect to the Storage Server
v2.0.
Version 2.0 of the Storage Server can continue to use the
video data and storage settings from previous versions.
When upgrading from any versions before 1.1.2.27, you need
to set motion detection (➝ P. 124) again. You can check your
version information from the "Version information" dialog box
(➝ P. 295) of the Storage Server and the Viewer.
When the InstallShield Wizard Completed
6
screen is displayed, click Finish.
Installation is now completed.
Installation Procedures
2
47