How To Configure Snmp Support Over Vpns-Context-Based Access Control; Configuring An Snmp Context And Associating The Snmp Context With A Vpn - Cisco cBR-8 Configuration And Troubleshooting Manual

How to Configure SNMP Support over VPNs—Context-Based Access Control
How to Configure SNMP Support over VPNs—Context-Based
Access Control

Configuring an SNMP Context and Associating the SNMP Context with a VPN

Perform this task to configure an SNMP context and to associate the SNMP context with a VPN.
• Only the following MIBs are context-aware. All the tables in these MIBs can be polled:
Note
• Only two SNMP variables in the IP-FORWARD-MIB can be polled: 1.3.6.1.2.1.4.24.3
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 snmp-server context context-name
Example:
Device(config)# snmp-server context context1
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
72
◦ CISCO-IPSEC-FLOW-MONITOR-MIB
◦ CISCO-IPSEC-MIB
◦ CISCO-PING-MIB
◦ IP-FORWARD-MIB
◦ MPLS-LDP-MIB
(ipCidrRouteNumber - Scalar) and 1.3.6.1.2.1.4.24.4.1 (ipCidrRouteEntry - Table).
SNMP Support over VPNs—Context-Based Access Control
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Creates and names an SNMP context.