Configuring Ipsec Vpn Policies; Setting Up A Site-To-Site Vpn - Cisco Small Business RV315W Administration Manual

VPN

Configuring IPsec VPN Policies

STEP 2
STEP 3
Configuring IPsec VPN Policies
STEP 1
STEP 2
Cisco RV315W Broadband Wireless VPN Router Administration Guide
- PC-to-Site VPN: A secure VPN tunnel between the RV315W and a
remote PC that installs a third-party client software.
• Remote Gateway Address/Hostname: IP address or hostname of the
remote network.
- For a Site-to-Site VPN, the IP address or hostname of the remote gateway
is displayed.
- For a PC-to-Site VPN, the IP address or hostname of the remote PC is
displayed. Separate multiple IP addresses with commas (,).
• Local Gateway Address: IP address of the local network.
• Authentication Method: Authentication method used by the IPsec VPN
policy.
• Connection Status: Shows whether the IPsec VPN tunnel is connected or
disconnected.
Click Add to add an IPsec VPN policy or click Edit to edit the settings of an existing
IPsec VPN policy. See
Click Delete to delete an existing IPsec VPN policy.
An IPsec VPN policy is used to establish a VPN connection between two peers.
Up to 50 IPsec VPN policies can be configured on the RV315W.

Setting Up a Site-to-Site VPN

A Site-to-Site VPN policy is used to create a new tunnel between two VPN
devices, such as a Cisco RV315W router at your office and a Cisco RV315W
router at a remote office.
To create a Site-to-Site (gateway-to-gateway) VPN policy:
Click VPN > IPsec VPN. The IPsec VPN page opens.
Click Add.
Configuring IPsec VPN Policies.
6
69