Mct-237; Mcm-140; Mkp-150/151/152; Mkp-160 - Visonic PowerMaxExpress User Manual

APPENDICES

MCT-237

The MCT-237 two-way wireless keyfob is used to
control single or all partitions.
Arming/Disarming All Partitions
To arm/disarm all partitions, press the HOME /
AWAY / DISARM button on the keyfob.
Arming/Disarming a Single Partition
To arm/disarm a single
PARTITION SELECTION button on the keyfob once.
In this state repeated pressing of the PARTITION
SELECTION button will toggle between the enabled
partitions and Partition All. To arm/disarm the desired
partition(s), press the HOME/AWAY/DISARM button.

MCM-140+

The wireless remote commander is used to control
single or all partitions.
Arming/Disarming All Partitions
To arm all partitions, press the HOME / AWAY /
DISARM button followed by the user code.
Arming/Disarming a Single Partition
To arm/disarm a single partition, press the "LIGHT"
button followed by the desired partition number (1, 2
or 3). When the red LED turns OFF, press the
HOME/AWAY/DISARM button within 5 seconds
followed by the user code.

MKP-150/151/152

The two-way wireless keypad is used to control single or all partitions and functions in the same way as the
PowerMaxExpress control panel. See the section on "The Show Function" above (substitute the
button with the button).

MKP-160

The touch screen keyprox can be used with any combination of partitions.
Arming / Disarming Partition(s)
Press the desired partitions buttons. When the selected keys blink, press the HOME / AWAY / DISARM button
and then present your proximity tag.
32
partition, press the
MCT-237
AWAY
HOME
AUX 1
MCM-140+
3-color
Buzzer LED
Away
2
Home
5
8
Prog.
Aux
0
mode
#
*
Emer-
Fire
gency
Panic
D-303974 PowerMaxExpress User's Guide
DISPLAY
DISARM
PARTITION
SELECTION
AUX 2
Light
Off