Hp Server Remote Management Card System Requirements; Minimum Server Requirements - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual

Hp server remote management card user guide
Hide thumbs Also See for P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade:
Table of Contents

Advertisement

Chapter 2
ROM (see Appendix C for details). When available, new firmware versions can
be obtained from the HP web site.
SNMP support. The HP Server Remote Management Card includes SNMP
support embedded in firmware on the Remote Control card. SNMP queries (MIB-
II) provide seamless integration with any SNMP management platform including
HP Toptools and HP OpenView. SNMP traps that occur during a server hang or
power down may be forwarded to a management console of your choosing. These
management solutions provide in-band (network connected) monitoring of your
servers.
DHCP support. DHCP is based on a client-server paradigm in which the HP
Server Remote Management Card contacts a DHCP server for configuration
parameters. The DHCP server is typically centrally located and operated by the
network administrator. The HP Server Remote Management Card can be reliably
and dynamically configured with parameters appropriate to the current network
architecture. These parameters are the IP address, subnet mask and default
gateway.
Integration with HP Toptools Device Manager. The HP Server Remote
Management Card fully integrates with the Toptools Device Manager product
(version 5.0 and above). Access to your HP Server Remote Management Card
may be done via accessing a server page of a server that has the HP Server
Remote Management Card installed, or through the Others list under
Devices|Device Types.
Group actions: If you use the HP Server Remote Management Card in a server
managed by HP Toptools Device Manager, you can perform "group actions" on
multiple HP Server Remote Management Cards by selecting all the cards you
want with your mouse and right-clicking. Group actions include adding and
deleting users, changing user passwords, viewing user configurations, replicating
card configurations, powering on and off the server, and updating card firmware.
CAUTION
A special procedure is required when performing group
actions on tc3100 and tc4100 servers. This is presented in
Appendix G.
HP Server Remote Management Card System
Requirements

Minimum Server Requirements

To install and use the HP Server Remote Management Card, you will need:
12
Introducing HP Server Remote Management Card

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc4100Tc3100

Table of Contents