HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 36
Hp server remote management card user guide
Hide thumbs
Also See for P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade:
- Maintenance manual (111 pages) ,
- User manual (48 pages) ,
- Installation manual (38 pages)
Table of Contents
Advertisement
Chapter 4
7. Click the "TCP/IP Settings" button (see Figure 4-10). Select the "Server
assigned IP address" option. The client will automatically get an IP
Address from the HP Server Remote Management Card. Check "Specify
name server addresses" and make sure all DNS and WINS entry fields are
set to zero (0). Uncheck "Use default gateway on remote network."
Click OK.
NOTE
The card derives the address using the PPP IP address of the
card which it increments by "1". If the resulting address is
equal to "0" or "255," it is incremented by "1" again.
30
Figure 4-10. Define TCP/IP Settings
Setting Up the Remote Connection
Advertisement
Table of Contents
