Making A Custom Group; Accessing Custom Groups - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual

Appendix G
CAUTION HP Toptools will not find tc3100 and tc4100 Remote
Management Cards that have recently been added until
Toptools "discovery" has been run. This is a lengthy
procedure that is usually run at night. Check with your
network administrator if you are unsure.
After discovery has occurred, you can add the new Remote
Management Cards to your custom group.

Making a Custom Group

You can perform group actions directly on the Remote Management Cards found
in your search (Figure G-2). You can also create a "custom group" of these cards
that you can easily retrieve at a later date. To make a custom group:
1. Select all the Remote Management Cards found in your search.
2. Right-click anywhere in the selected bloc to open a floating menu.
3. Select Add to Custom Group from the menu.
4. Either add the Remote Management Cards to an existing group, or
create a new group.

Accessing Custom Groups

To open a custom group that you have previously created, click the Devices
button on the menu at the left of the Toptools screen, and choose Custom Groups
from the Devices drop down list.
Group Actions with HP Toptools
97