HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 66

Appendix A
Pager
Code Server Event
02101 SCSI Duplex Board has been inserted
02502 Cache Protocol and Parity error
02516 ACPI hardware failure
0274X Hot Swap Cage: SCSI Bus type has changed
0274X Hot Swap Cage: SCSI cable removed
0274X Hot Swap Cage: SCSI cable attached
02840 Hot Swap Cage: SCSI terminator removed
02841 Hot Swap Cage: SCSI terminator attached
PCI Hot Plug fault deasserted
03300
PCI Hot Plug fault asserted
03300
PCI Hot Plug powered on
03305
03305 PCI Hot Plug powered off
03406 Normal ACPI server shutdown
19900 Server Management Controller started
19901 SDR area cleared.
19902 FRU internal use area cleared
20000 Failed Remote Management login attempt
20001 Remote management user has logged in
Remote management user logged out
20002
Remote management user automatically logged out
20003
Remote management user connection lost
20004
Remote management user dialback failed
20005
20006 Integrated RA configuration reset to defaults
20100 Remote-initiated <Ctrl-Alt-Del>
20101 Remote-initiated reset
20102 Remote-initiated power cycle
20103 Remote-initiated power down
20104 Remote-initiated power up
20105 Automatic power shutdown due to critical condition.
Front panel power down.
20106
Automatic graceful shutdown of NOS
20107
Remote-initiated graceful shutdown of NOS
20108
201XX Voltage Utilization warning
201XX Voltage Utilization error
20201 Remote management user page: Modem error
60
Event Codes
Severity
INFORMATIONAL
CRITICAL
WARNING
WARNING
WARNING
INFORMATIONAL
WARNING
INFORMATIONAL
INFORMATIONAL
CRITICAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
WARNING
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
WARNING
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
CRITICAL
INFORMATIONAL
WARNING
INFORMATIONAL
WARNING
CRITICAL
INFORMATIONAL