HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 91

Appendix C
8. In the TFTP IP Address field, type the IP address of your client machine.
In the TFTP File Name field, type: doscopy.dsk.
9. Click "Start Power/Reset Option". The server restarts and TFTP loads the
image file onto the HP Server Remote Management Card where it is then
supplied to the HP Server as a boot image. The HP Server boots the DOS
disk and executes the autoexec.bat file. It creates a "c:\temp" directory,
copies the new driver there, and brings up the NetWare startup.ncf file in
the DOS editor. The administrator uses Text Remote Console to modify
the path to the SCSI driver:
LOAD c:\temp\aic7870.dsk SLOT=10001
The administrator saves the file, exits the editor and runs server.exe to
start the NetWare server.
Installing and Using TFTP
85