Accessing The Hp Data Protection Storage Server Management Console; Using The Direct Attach Method - HP ProLiant DL100 G2 Installation Manual

3 Accessing the HP Data
Protection Storage Server
Management console
Before accessing the HP Data Protection Storage Server Management
console, verify that all cables and cords are connected to the Data
Protection Storage Server. See the HP ProLiant 1U Rail installation
instructions for additional installation guidance.
To access the HP Data Protection Storage Server Management console,
you can use these access methods:
Direct Attach
Remote Browser
Remote Desktop
For more information, see
IMPORTANT:
An IP address can be substituted for a storage server's serial number
when using either Remote Browser or Remote Desktop methods to access
the HP Data Protection Storage Server Management console.

Using the Direct Attach method

You can access the HP Data Protection Storage Server Management
console using a monitor, mouse, and keyboard directly attached to the
storage server.
To connect the storage server to a network using the Direct Attach method
Planning for installation
HP ProLiant DL100 G2 Data Protection Storage Server
To connect directly to the storage server
without using the network.
To establish a browser-based connection
to the HP ProLiant Data Protection
Storage Server Management console
from a remote client running Internet
Explorer 5.5 (or later).
To establish a connection from a remote
client without using a browser. This
method requires the client to have
Windows Remote Desktop capability.
on page 13.
25