G Group Actions With Hp Toptools; Integration With Hp Toptools Device Manager; Selecting The Correct Remote Management Cards - HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual

G Group Actions with HP Toptools

Integration with HP Toptools Device Manager

The HP Server Remote Management Card fully integrates with the Toptools
Device Manager product (version 5.0 and above). Access to your HP Server
Remote Management Card may be done via accessing a server page of a server
that has the HP Server Remote Management Card installed, or through the Others
list under Devices|Device Types.
Group actions: If you use the HP Server Remote Management Card in a server
managed by HP Toptools Device Manager, you can perform "group actions" on
multiple HP Server Remote Management Cards by selecting all the cards you
want with your mouse and right-clicking. Group actions include adding and
deleting users, changing user passwords, viewing user configurations, replicating
card configurations, powering on and off the server, and updating card firmware.

Selecting the Correct Remote Management Cards

In HP Toptools, the "Device type" for the HP Server Remote Management Card
is "Management device, remote control card."
CAUTION
HP Toptools does not distinguish between the different types of Remote
Management Cards. To select a group of the cards for tc3100 and tc4100 Servers,
you must search for Remote Management Cards with the correct model number
(P2521) and firmware prefix (C) using this procedure:
1. Launch HP Toptools.
2. Open the Devices drop down list by clicking the Devices button on
the menu at the left of the Toptools screen.
3. Choose Search from the Devices drop down list.
4. Enter the search criteria shown in Figure G-1, and click Start
Search.
The HP Server Remote Management Cards used in the
tc3100and tc4100 HP Servers are not the same as the Remote
Management Cards used in other HP Servers.
95