HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 71

Hp server remote management card user guide
Hide thumbs Also See for P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade:
Table of Contents

Advertisement

Appendix A
Pager
Code
Server Event
21356
All NICs (active and standby) in a redundant group have failed.
21360
The LAN adapter has detected a number of receive errors higher than
the threshold level.
The LAN adapter has detected a number of transmit errors higher
21361
than the threshold level.
21362
The LAN adapter installed in the server has reset itself.
21363
The LAN adapter has detected a network protocol problem.
21364
The LAN adapter has detected a packet length error.
21365
The LAN adapter has detected a number of packet length errors
higher than threshold level.
21366
The LAN adapter has detected a number of late collision errors
higher than the threshold level.
The LAN adapter has detected a number of packet collisions higher
21367
than the threshold level. This usually indicates a busy network.
21368
The LAN adapter has detected a network fault. Data transmission
was stopped.
21369
The LAN adapter has detected a busy network.
21370
The LAN adapter has detected a performance problem associated
with an inadequate number of receive buffers.
21371
The LAN adapter has detected a performance problem associated
with an inadequate number of receive buffers.
21372
The LAN adapter has detected that the total number of packets
handled during a processing interval has reached a threshold level.
21401
Tape Drive : Problems reading data
21402
Tape Drive : Problems writing data
21403
Tape Drive : Read or write data error
21404
Tape Drive : Faulty media detected
Tape Drive : Tape device may have read fault - call helpline
21405
Tape Drive : Tape device may have write fault - call helpline
21406
Tape Drive : Tape cartridge has reached the end of its useful life
21407
21408
Tape Drive : The tape cartridge is not data-grade
21409
Tape Drive : Attempting write to a write-protected cartridge
21410
Tape Drive : Cannot eject the cartridge while tape drive is in use
21411
Tape Drive : The tape in the drive is a cleaning cartridge
21412
Tape Drive : Attempt to load cartridge of a type which is not
supported
21413
Tape Drive : The tape in the drive has snapped
21414
Tape Device Has Detected Snapped Tape
Event Codes
Severity
CRITICAL
WARNING
WARNING
CRITICAL
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
CRITICAL
INFORMATIONAL
WARNING
WARNING
WARNING
CRITICAL
CRITICAL
CRITICAL
WARNING
WARNING
CRITICAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
CRITICAL
CRITICAL
65

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc4100Tc3100

Table of Contents