HP P5389A - Intel Pentium III-S 1.4 GHz Processor Upgrade User Manual page 51

Chapter 6
2. At the pcAnywhere main screen, click the Remote Control button. You
will see the Remote Control connection items displayed.
Figure 6-4. pcAnywhere "Remote Control" Connection Items
3. Create a new connection item to access your HP Server by double-clicking
the "Add Remote Control Item". An installation Wizard prompts you for
information needed to set up a new connection item.
4. The Wizard first prompts you for the name of a "New Host to Call". Enter
the name of the HP Server where you installed the HP Server Remote
Management Card and click Next.
5. Set up a modem connection item and select an installed modem.
NOTE For both Windows NT and Windows 95, 98 and 2000, you
must have a modem already installed to complete the
configuration. If the PC you intend to use as the remote client
does not have a modem installed and recognized by Windows,
you must install one to proceed.
6. Highlight an installed modem from the list of connection devices and click
Details. Microsoft Windows presents you with a
pre-configured list of Unimodem entries for your selection.
7. Check to be sure that the "Maximum speed" field corresponds to the
capabilities of the installed modem you selected.
Setting Up NT Graphics Console Redirection Using pcAnywhere
45