Improving Copy Quality; Sorting Copies Using The Adf; Changing Text Copy Resolution - Konica Minolta bizhub 20 User Manual

Chapter 12

Improving copy quality

You can choose from a range of quality
settings. The default setting is Auto.

Auto
Auto is the recommended mode for
ordinary printouts. Suitable for documents
that contain both text and photographs.

Text
Suitable for documents containing only
text.

Photo
Suitable for copying photographs.
To temporarily change the quality setting,
follow the steps below:
a
Make sure you are in Copy mode.
b
Load your document.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Contrast/Quality. Press a or b to
choose Quality.
Press OK.
e
Press d or c to choose Auto, Text or
Photo. Press OK.
f
Press Start.
To change the default setting, follow the
steps below:
a
Press Menu, 3, 1.
b
Press a or b to choose the copy quality.
Press OK.
c
Press Stop/Exit.
76

Sorting copies using the ADF

12
You can sort multiple copies. Pages will be
stacked in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a
Make sure you are in Copy mode.
b
Load your document in the ADF.
c
Use the dial pad to enter the number of
copies (up to 99).
d
Press Sort.
e
Press Start.
Changing text copy
resolution
You can change the text copy resolution to
1200x600dpi if you are using the scanner
glass and have selected Text as the
Contrast/Quality and an enlargement or
reduction ratio of 100%. The default setting is
600dpi.
a
Make sure you are in Copy mode.
b
Put your document on the scanner
glass.
c
Press Menu, 3, 2.
d
Press a or b to choose the text copy
resolution.
Press OK.
e
Press Stop/Exit.
12
12