Konica Minolta bizhub 20 User Manual page 156

c
Push down the blue lock lever and take
the toner cartridge out of the drum unit.
IMPORTANT
• To avoid print quality problems, DO NOT
touch the shaded parts shown in the
illustrations.
• Wait to unpack a new drum unit until
immediately before you put it in the
machine. Exposure to direct sunlight or
room light may damage the drum unit.
• Be sure to seal up the used drum unit
tightly in a bag so that toner powder does
not spill out of the unit.
d
Unpack the new drum unit.
e
Put the toner cartridge firmly into the
new drum unit until you hear it lock into
place. If you put the cartridge in
correctly, the blue lock lever will lift
automatically.
Note
Make sure that you put in the toner
cartridge correctly or it may separate from
the drum unit.
f
Put the new drum unit and toner
cartridge assembly in the machine.
Do not close the front cover.
Troubleshooting and routine maintenance
g
Press Clear/Back.
Replace Drum?
a
1.Yes
b
2.No
Select ab or OK
To confirm you are installing a new
drum, press 1.
h
When the LCD shows Accepted, close
the front cover.
C
147