Konica Minolta bizhub 20 User Manual page 137

Error Message
Replace Parts
PF kit 2
Replace Toner
Scan Unable XX
Scanner Locked
Size mismatch
Toner Low
Too Many Files
Too Many Trays
Unusable Device
128
Cause
It is time to replace the paper
feeding kit for Tray 2.
The toner cartridge is at the end
of its life and printing is not
possible.
The machine has a mechanical
problem.
Document is too long for duplex
scanning.
The scanner lock is locked.
The paper in the tray is not the
correct size.
If the LCD shows Toner Low,
you can still print; however, the
machine is telling you that the
toner cartridge is near the end of
its life and the toner will soon
need replacing.
There are too many files stored
on the USB Flash memory drive.
More than one optional tray is
installed.
An incompatible or broken device
has been connected to the USB
direct interface.
Action
Call your KONICA MINOLTA dealer to
replace the PF Kit 2.
Replace the empty toner cartridge with a
new one. (See Replacing a toner cartridge
on page 143.)
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 129.)
Press Stop/Exit. Use the suitable size of
paper for duplex scanning. (See Scan
on page 178.)
Open the document cover, and then release
the scanner lock lever.
Press Stop/Exit.
Load the correct size of paper in the tray and
set the "Paper Size" (Menu, 1, 2, 2 (See
Paper Size on page 20).
Order a new toner cartridge now.
Reduce the number of files stored on the
USB Flash memory drive.
The maximum number of optional trays is
one. Remove any additional trays.
Remove the USB Flash memory drive from
the USB direct interface.