8. The PWR LED on the modem will light.
Congratulations. You have successfully completed the installation procedure. Please register your 56K
USB Modem at www.usr.com/productreg/.
Windows 2000
You must be logged in as an administrator in order to install this modem.
1. When the Found New Hardware Wizard appears, click Next.
2. Insert the USRobotics Installation CD-ROM into your CD-ROM drive, select Search for a
suitable driver for my device (recommended).
3. Click Next, then select only CD-ROM drives and click Next.
OR
If a driver CD was not provided or the driver was downloaded from www.usr.com, browse to the folder
where the drivers were downloaded .
4. Select Search for a suitable driver for my device (recommended) and click Next.
5. Select only CD-ROM drives and click Next.
6. When Windows locates the driver for the modem, click Next.
7. If a Digital Signature Not Found window appears, click Yes.
8. Click Finish to complete the installation.
9. The PWR LED on the modem will light.
Congratulations. You have successfully completed the installation procedure. Please register your 56K
USB Modem at www.usr.com/productreg/.
Linux Kernel 2.4.20 or Higher
You need a USB modem driver (CDC ACM) compiled into a Linux kernel 2.4.20 or higher or as a loadable
module for your kernel. Installation of the modem under these kernels is fully automatic provided your
kernel has the Plug and Play module enabled (default). You do not need to install any drivers off the
USRobotics installation CD-ROM.
Congratulations. You have successfully completed the installation procedure. Please register your 56K
USB Modem at www.usr.com/productreg/.
Mac OS X 10.4.3 or Later
1. Insert the USRobotics Installation CD-ROM into your CD-ROM drive.
2. Go to Finder and double-click the CD icon.
3 USRobotics has thoroughly tested this driver in conjunction with the supported hardware and has verified compatibility with Windows Vista, XP, and
2000.
56K USB Modem
3
Installation Instructions - 5
User Guide
Need help?
Do you have a question about the 56K USB Modem and is the answer not in the manual?
Questions and answers