Table of Contents
Advertisement
If you need to uninstall the modem,
rerun the setup.exe program from the
installation disk.
You are ready to install communications
software. Refer to the manual of the
communications software for
instructions on installation.
After you install your communications
software, you are ready to use the
modem.
Installing Modem Drivers with
Windows NT 4.0 with PNP
Enabled
After installing the modem, turn on
1.
your Windows NT workstation.
After the Windows NT login,
2.
Windows NT will auto-detect your
modem hardware and the "New
Hardware Found" screen appears.
Select Driver from disk provided
3.
by hardware manufacturer and
click OK.
Insert the installation disk or CD-
4.
ROM into the appropriate drive.
Select. A:\ for disk drive or D:\ for
CD-ROM drive.
21
Advertisement
Table of Contents
