Table of Contents
Advertisement
How to Tell if x2 is Enabled in Your Modem
If you aren't sure whether x2 is enabled in your Courier V.Everything, use
the ATI7 command to display product configuration information. If x2 is
enabled on your Courier V.Everything, the following information
displays:
USRobotics Courier V.Everything Configuration Profile...
Copyright, 19xx-96, U.S. Robotics. All rights reserved.
Product type
Options
Fax Options
Clock Freq
Eprom
Ram
Supervisor date
DSP date
Supervisor rev
DSP rev
Serial Number
OK
Note: Dates, serial numbers, revision numbers, and Clock Frequencies
may vary. The most important line is the "Options" line, which lists
support for x2.
Obtaining x2
For information about how x2 works, visit the x2 web site at
http:/ / www.usr.com/x2
10-2
US/Canada External
HST,V32
bis,Terbo,VFC,V34+,x2
Class 1,Class 2.0
{Clock Frequency}
256k
32k
{Date}
{Date}
{
x.x.x}
{
x.x.x}
{serial number}
Courier V.Everything Getting Started Guide
Advertisement
Table of Contents
