Host Wakeup; Host Sleep; Get Communication Configuration - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol

7.3.7 Host Wakeup

By transmitting the Wakeup Notification, the Host indicates it has just "powered on" or reset and is ready
to receive RV-8 Notifications or Responses. The Host is assumed to be asleep upon power up of the RV-
8. Host status is maintained during standby.
7.3.7.1 Command Packet Description
7.3.7.2 Data Description
7.3.7.3 RV-8 Response
The RV-8 will respond to this command with an ACK. The unit also returns the input name, audio status,
and mode.

7.3.8 Host Sleep

By transmitting the Sleep command, the Host indicates it has just "powered down" and will no longer
respond to RV-8 Notifications. No Acknowledgment is expected. The Host is assumed to be asleep upon
power up of the RV-8. Host status is maintained during standby.
7.3.8.1 Packet Description
7.3.8.2 Data Description

7.3.9 Get Communication Configuration

This command is a request to the RV-8 for the current communications configuration for the serial port and
protocol. The RV-8 responds to this command with a Communication Configuration Packet.
7.3.9.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
7.3.9.2 Communication Configuration Response Packet
Application Header:
Command
© 2005 Lexicon, Inc. All rights reserved.
Application Header:
Command HOST_WAKEUP
Data Count 0
Application Data:
N/A
N/A
Application Header:
Command HOST_SLEEP
Data Count 0
Application Data:
N/A
N/A
DC_CMD_GET_COM_CONFIG
0
N/A
DC_RESP_COM_CONFIG
Printed on: 07/26/05
0x11
0x00
0x12
0x00
0x2F
0x00
0x8C
15 of 72