Table of Contents
Advertisement
Lexicon, Inc.
RV-8 Serial Communications Protocol
7.3.29.4 Data Validation
If a value is passed that exceeds the maximum value of that parameter the RV-8 will ignore the command
and transmit a NAK command with an error code DC_INVALID_DATA.
7.3.30 Get Input Name by Id – NOT IMPLEMENTED, DO NOT USE.
This command is a request to RV-8 for the custom input name. RV-8 will respond with "Input Name
Packet".
7.3.30.1 Command Packet Description
Application Header:
Command MC_CMD_GET_INPUT_NAME
Data Count 1
Application Data:
Data[0]
7.3.30.2 Data Description
InputId:
Data Type:
Definition/Conversion:
7.3.30.3 Data Validation:
The InputId must be a valid Input number. If it is not the RV-8 will respond with a NAK packet and error
code DC_INVALID_INPUT.
7.3.30.4 Input Name Response Packet
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]- Data[DataCount-1] InputName
7.3.30.5 Data Description
InputId:
Data Type:
Definition/Conversion:
InputName:
Data Type:
Max Length:
© 2005 Lexicon, Inc. All rights reserved.
InputId
Unsigned 8 bit Integer
Appendix D RV-8 Input Ids
MC_RESP_INPUT_NAME
Number of Characters in
InputName + 2
InputId
Unsigned 8 bit Integer
Appendix D RV-8 Input Ids
Null (0x00) terminated ASCII character string.
INPUT_NAME_LENGTH defined in
Printed on: 07/26/05
0x47
0x01
nn
0x96
nn
nn
ch ch ch ... 0x00
Appendix E Protocol
Constants.
35 of 72
Advertisement
Table of Contents
