Set Communication Configuration - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
Data Count
Application Data:
Data[0]
7.3.9.3 Data Description
Data Word Bit
0 0
0 1
Acknowledge Enable:
TRUE Indicates the RV-8 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the RV-8 will not transmit any positive Acknowledge Notification
Parameter Change Enable:
TRUE Indicates the RV-8 will transmit any parameter change Notification as specified
FALSE Indicates the RV-8 will not transmit parameter change Notifications.

7.3.10 Set Communication Configuration

The Set Communication Configuration Command allows the serial port user to set up the various serial
port/ protocol configuration parameters.
7.3.10.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
7.3.10.2 Data Description
Data Word Bit
0 0
0 1
Acknowledge Enable:
TRUE Indicates the RV-8 will transmit Acknowledge Notification's to the Host.
FALSE Indicates the RV-8 will not transmit any positive Acknowledge Notification
Parameter Change Enable:
TRUE Indicates the RV-8 will transmit any parameter change Notification as specified
FALSE Indicates the RV-8 will not transmit parameter change Notifications.
7.3.10.3 RV-8 Response
The data values transmitted will be copied over to the registers stored in nonvolatile RAM. The RV-8 will
respond with an ACK Packet.
© 2005 Lexicon, Inc. All rights reserved.
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
messages. The RV-8 will always transmit NAK error notification messages.
in the Parameter Change Notification Message.
DC_CMD_SET_COM_CONFIG
1
Configuration Register 0
Definition
Acknowledge Enable
Parameter Change Enable
messages. The RV-8 will always transmit NAK error notification messages.
in the Parameter Change Notification Message.
Printed on: 07/26/05
0x01
nn
0x30
0x01
nn
16 of 72