Send Ir Command; Get Parameter Value By Id - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
TimeStamp:
SerialNumber:

7.3.17 Send IR Command

This command allows the HOST to transmit IR command key codes to the RV-8.
7.3.17.1 Command Packet Description
7.3.17.2 Data Description
KeyCode:
Data Type:
Valid Values:
7.3.17.3 RV-8 Response
The KeyCode is processed as a valid IR code. No acknowledgment will be sent from RV-8.
7.3.17.4 Data Validation
The KeyCode data will be verified as a legal IR code. If the Code is not valid the RV-8 will not respond.

7.3.18 Get Parameter Value by Id

Request to RV-8 for the current value of a given parameter. The RV-8 will respond with a "Parameter
Value Packet".
7.3.18.1 Command Packet Description
Application Header:
Command
Data Count
Application Data:
Data[0]
Data[1]
7.3.18.2 Data Description
ParamId:
Data Type:
© 2005 Lexicon, Inc. All rights reserved.
Is a null terminated ASCII text string describing the build date and time of the
current software build. The Format of this text string is:
"yy/mm/dd(sp)hh:mm"
yy- is the last two digits of the year (i.e. year 2001=01, year 2002 = 02)
mm - is the month
dd- is the day
(sp) - is an ASCII space character (0x20)
hh - is the hour
mm - is the minute
The Serial Number is an unsigned 32 bit integer holding the unique value of the
current unit.
Application Header:
Command MC_CMD_IR
Data Count 1
Application Data:
Data[0] KeyCode
Unsigned 8 bit integer.
Appendix C RV-8 IR-Codes
MC_CMD_GET_PARAM_VALUE_BY_ID
2
ParamId (LSB)
ParamId (MSB)
Unsigned 16 bit integer.
Printed on: 07/26/05
0x39
0x01
nn
0x3A
0x02
nn
nn
26 of 72