Acknowledgment Packets; Acknowledge - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
Same as Paragraph 7.3.14.2
7.1.4.3 HOST Response
The RV-8 does not expect any response from the HOST.
7.1.4.4 Defaults
The following Parameters Notifications are Enabled in the RV-8 default state:
Parameter
Current Mode
Main Zone Mute
Main Zone Volume
Main Zone Balance
Main Zone Input Selection
Zone 2 Input
Zone 2 Volume
Zone 2 Balance
Zone 2 Mute
Bass
Treble
Loudness
Tilt
Menu Background On/Off
See RV-8 V1.10 Parameter ID List for the Parameter ID definitions.

7.2 Acknowledgment Packets

Acknowledge and No Acknowledge packets are used to communicate transmission, packet and data
validation status. Both the HOST and RV-8 can transmit and receive these packets.

7.2.1 Acknowledge

7.2.1.1 Packet Description
© 2005 Lexicon, Inc. All rights reserved.
RV-8 Parameter Name
PARAM.MAIN.EFFECT
PARAM.MAIN.MUTE
PARAM.MAIN.VOLUME
PARAM.MAIN.BALANCE
PARAM.MAIN.INPUT
PARAM.ZONE.INPUT
PARAM.ZONE.VOLUME
PARAM.ZONE.BALANCE
PARAM.ZONE.MUTE
PARAM.MAIN.BASS
PARAM.MAIN.TREBLE
PARAM.MAIN.LOUDNESS
PARAM.MAIN.TILT
PARAM.OSD.BACKGND
Application Header:
Command DC_ACK
Data Count
Application Data:
Data[0] Command
Printed on: 07/26/05
0xE0
10x01
nn
10 of 72