Host Wakeup; Host Sleep - Lexicon RV8 V1.0 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
Command
Data Count
Application Data:
Data[0]
Data[1]-Data[DataCount-1]
7.3.6.2 Data Description
CustomNameEnable:
DataType:
TRUE:
FALSE:
CustomName:
Data Type:
Max Length:
7.3.6.3 RV8 Response
If the custom name enable is TRUE then the custom name banner is display on "power on". If the Custom
Name Enable is FALSE the custom name is not displayed. The CustomName string is copied to
Nonvolatile RAM. The RV8 will ACK when completed with this command.
7.3.6.4 Data Validation:
No data validation is done on the transmitted data.

7.3.7 Host Wakeup

By transmitting the Wakeup Notification, the Host indicates it has just "powered on" or reset and is ready to
receive RV8 Notifications or Responses. The Host is assumed to be asleep upon power up of the RV8.
Host status is maintained during standby.
7.3.7.1 Command Packet Description
7.3.7.2 Data Description
7.3.7.3 RV8 Response
The RV8 will respond to this command with an ACK. The unit also returns the input name, audio status,
and mode.

7.3.8 Host Sleep

By transmitting the Sleep command, the Host indicates it has just "powered down" and will no longer
respond to RV8 Notifications. No Acknowledgment is expected. The Host is assumed to be asleep upon
power up of the RV8. Host status is maintained during standby.
7.3.8.1 Packet Description
© 2004 Lexicon, Inc. All rights reserved.
DC_CMD_SET_CUST_NAME 0x2C
Number of characters in
CustomName + 2
CustomNameEnable
CustomName
Enables/Disables the Custom Name Display.
Boolean
CustomName Enabled
CustomName Disabled
Null (0x00) terminated ASCII character string.
CUSTOM_NAME_LENGTH defined in
Application Header:
Command HOST_WAKEUP
Data Count 0
Application Data:
N/A
N/A
Printed on: 01/18/05
nn
nn
ch ch ch ... 0x00
Appendix G Protocol Constants.
0x11
0x00
15 of 74