Table Of Contents - Lexicon RV-8 V1.10 - SERIAL COMMUNICATIONS PROTOCOL DEFINITION REV 1-7 Manual

Lexicon, Inc.
RV-8 Serial Communications Protocol
1 Documents
2 Definitions
2.1 Protocol Version Cross-reference
3 Abbreviations
4 General Description
5 Physical Layer
5.1 DB-9 RS232 Connector
5.2 Serial Port Driver
5.3 Errors
5.4 RV-8 Receive Buffer
5.5 RV-8 Hardware Verification
6 Data Link Layer
6.1 Errors
7 Application Layer
7.1 RV-8 Asynchronous Notification Packets
7.1.1 Wakeup Notification
7.1.2 Sleep Notification
7.1.3 Front Panel Display
7.1.4 RV-8 Parameter Notification by Id
7.2 Acknowledgment Packets
7.2.1 Acknowledge
7.2.2 No Acknowledge
7.3 Host Initiated Command Packets
7.3.1 Reset Unit
7.3.2 Get Custom Name
7.3.3 Get ARRAY Definition(RV-8)
7.3.4 Get ARRAYITEM(RV-8)
7.3.5 Set ARRAYITEM(RV-8)
7.3.6 Set Custom Name
7.3.7 Host Wakeup
7.3.8 Host Sleep
7.3.9 Get Communication Configuration
7.3.10 Set Communication Configuration
7.3.11 Set Mute
7.3.12 Send Display String Command
7.3.13 Get Parameter Definition by Id
7.3.14 Set Parameter Value by Id
7.3.15 Set Parameter Value by Id, No Run
7.3.16 Get Unit Configuration
7.3.17 Send IR Command
7.3.18 Get Parameter Value by Id
7.3.19 Set Parameter Notification by Id
7.3.20 Parameter Get Value String by Id - NOT IMPLEMENTED, DO NOT USE.
7.3.21 Clear All Parameter Notifications
7.3.22 Get System Status
7.3.23 Get Zone 3 Status
7.3.24 Set System Volume
7.3.25 Set Main Balance
7.3.26 Set Front/Back Balance
© 2005 Lexicon, Inc. All rights reserved.
Printed on: 07/26/05
5
5
5
5
5
6
6
6
6
6
7
7
7
8
8
8
8
8
9
10
10
11
11
11
11
12
12
13
14
15
15
15
16
17
17
18
21
22
23
26
26
27
28
29
29
31
31
32
33
3 of 72