Nomenclature; Midi Channel Allocation; Midi - Lexicon 960L Owner's Manual

960L

MIDI

The MIDI implementation for the 960L is very basic. Since
the implementation is fixed, there is no user interface for
modifying it.

Nomenclature

Numbering in MIDI, i.e. channel number, program num-
bers, etc., can be confusing, since some sources start
counting from zero and others start from one. This descrip-
tion will start from zero. If, for example, your MIDI con-
troller's lowest channel number is 1 (rather than 0), you
should add one to the values found in channel table
below.
Channel Usage
0 Global Channel
1 DSP Card1
2 DSP Card 2
3 Unused
4 Machine 1
5 Machine 2
6 Machine 3
7 Machine 4
8 Machine 5
9 Machine 6
10 Machine 7
11 Machine 8
12 Unused
13 Unused
14 Unused
15 Unused

MIDI Channel Allocation

The 960L uses a fixed channel allocation. All channels are
used or reserved, which means that 960L should
be the only device on its MIDI cable.
Description
Not currently in use
Configuration of card
Configuration of card
Reserved for Future Use
Program change for machine 1
Program change for machine 2, if present in current configuration
Program change for machine 3, if present in current configuration
Program change for machine 4, if present in current configuration
Program change for machine 5, if present in current configuration
Program change for machine 6, if present in current configuration
Program change for machine 7, if present in current configuration
Program change for machine 8, if present in current configuration
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
Home Next Page >>
<< Go Back
MIDI
6-3