Loading Programs And Registers; Loading Programs - Lexicon 960L Owner's Manual

960L

LOADING PROGRAMS AND REGISTERS

With more than 200 factory Programs to choose from, plus
up to 1,000 Registers for your own creation, you'll probably
spend most of your time with the 960L loading the effects
you want.
To simplify the selection of an appropriate effect, the 960L
programs are organized as 24 Banks of up to ten related
effects (see the Appendix for Program Descriptions). There
are 100 Banks available for Registers and 10 Banks for
Floppy storage and retrieval.

Loading Programs

When you first install the 960L, it will contain only factory
Programs. There are several ways to select and load
Programs. The simplest is designed to be familiar to users
who know the Lexicon 480L:
• Press the PROGRAM key, then the BANK key, to
bring up a list of Program Banks (Fig. 4-1).
• Scan the list of Banks to find one you want (e.g.,
"Halls").
• Select that Bank by entering its number on the
Numeric Keypad (or by scrolling to it with the
Navigation Arrow keys).
Yellow shows that this
menu is not "in focus"
Fader Labels in Scribble Strip are
from the currently loaded program.
Selected Bank and
Program are highlighted
Figure 4-1 — Program Load Screen
Home Next Page >>
• Press the PROGRAM key to get to the list of
Programs.
• Select the desired Program by entering its number
on the Numeric Keypad (or by scrolling to it with
the Navigation Arrow keys and pressing the ENTER
key).
Note:
When you change Programs, the display will
change and the motorized faders will move to the
positions corresponding to that Program's para -
meter settings.
If you already know the location of the Program you want,
you can do all this in just a few keystrokes:
• PROGRAM key (Skip this step if going to the last
Bank used.)
• BANK key
• Bank Number
• PROGRAM key
• Program Number
If you don't know the location of the Program you want,
the procedure is similar, except that you can scroll up and
down through the list of Banks to find the one you want.
Blue shows that this
menu is "in focus"
<< Go Back
Operations in Detail
4-3