Edit Tools For Registers; Using The Floppy Drive; The Cd-Rom; Machine Mode - Lexicon 960L Owner's Manual

Operations in Detail

Edit Tools for Registers

Pressing the Edit soft button accesses three tools (fig. 4-44):
1) Copy Bank -- When 1 is pressed on the Numeric
Keypad, the contents of the currently selected
Program or Register Bank are copied to an inter-
nal scratchpad.
2) Clear Register Bank – When 2 is pressed, the con-
tents of the currently selected Register Bank are
cleared. The Bank is made empty. For safety, the
user is prompted before the clear is executed.
Program Banks cannot be cleared.
3) Paste Register Bank – When 3 is pressed, the con-
tents of the scratchpad are copied to the cur-
rently selected Register Bank. For safety, the user
is prompted before the copy is executed.
Program Banks cannot be pasted to.

Using the Floppy Drive

P ressing the Floppy soft button accesses four tools
(Fig. 4-45):
1) Load From Floppy – When 1 is pressed, the con-
tents of the floppy disk are loaded into Register
Banks 101-110. For safety, the user is prompted
before the load is executed.
2) Store to Floppy – When 2 is pressed, the contents
of Register Banks 101-110 are written to the floppy
disk. For safety, the user is prompted before the
load is executed.
3) Format Floppy – When 3 is pressed, the floppy is
formatted in IBM 2HD format. For safety, the user
is prompted before the format is executed.
4) Clear Floppy Banks – When 4 is pressed, Register
Banks 101-110 are cleared. For safety, the user is
prompted before the clear is executed.
The files written to the floppy disk can be read and
archived on any PC running Windows 95, 98, or NT.
4-24

THE CD-ROM

Software updates will be made available on CD-ROM.
Instructions on how to load from CD-ROM will be provided.

MACHINE MODE

If the 960L is configured as multiple machines, which can
be seen from the bottom line of the System Status Display,
pressing the MACHINE key on the LARC2's Control Surface
will show you which Program or Register each machine is
running (Fig. 4-46).
The currently selected machine will be highlighted in the
list in the Main Operating Display and in the System Status
Display. To switch to a different machine, enter its number
on the Numeric Keypad (or scroll up or down with the
Numeric Arrow keys to select it, and press the ENTER key).
The fader and joystick assignments on the V-Page will then
change to those for the machine you've selected.
MACHINE SHORTCUTS:
1) If you know the number of the machine you want
to access, simply press and hold the MACHINE key
on the LARC2 and enter the number. It is not nec-
essary to wait for the Machine mode screen.
2) Hold down the MUTE MACHINE button and, on the
Numeric Keypad, press the number of the
machine you wish to mute or unmute.
3) Hold down PROGRAM or REGISTER and press the
number of the machine you want on the Numeric
Keypad. This will show the PROGRAM or REGISTER
mode for that machine.
4) Hold down STORE and press the number of the
machine you want and you will be storing the
edits currently on that machine.
Figure 4-46 — Machine Mode
Home Next Page >>
<< Go Back
Lexicon, Inc.