Lexicon 960L Owner's Manual page 31

960L
To enter Name or Information:
• Using the LARC2, use the Increment/Decrement
(+/-) keys to scroll between character positions in
the Name or Information display and use the
Navigation Arrows to select the desired character
from the matrix below, then press the ENTER key to
finalize your selection.
• If you have a PS/2 keyboard connected to the
AUX port on the LARC2's rear panel, you can type
in Name and Info. It is recommended that you
connect the keyboard before power is applied to
the 960L.
Delete the char-
acter to the left
of the cursor
Remove
All Text
Toggle between INSERT (put in the
selected character, moving the text
to make room) and WRT OVR
(replace the character under the
cursor with the selected character)
Go to the beginning
of the text
Figure 3-8 — Name screen (Info screens are similar)
Home Next Page >>
Names of Registers and Register Banks can be up to 16
characters long. Information displays for Registers can
hold 150 characters and Information displays for Banks
can hold 100 characters.
Go back to the basic
Register Info page
Go to the end
of the text
<< Go Back
Basic Operation
3-9