Tutorial; Select A Preset; Create A Hypermodel; Select The Green Channel Amp And Cabinet - DigiTech GNX3 User Manual

Tutorial

Tutorial
Suppose you wanted to create your own HyperModel™ that incorporates the sweet tones of a vintage
Tweed using an American 2x12 cabinet, and the ripping distortion of a Rectified Amp with a British 4x12
cabinet. Let's also suppose that you want to be able to toggle between an acoustic guitar simulation and this
new HyperModel™ with a preset that gives your single coil pickup a humbucker sound, uses no
Compression, has a Noise Gate that opens quickly, a subtle Chorus effect, no Delay, and a little bit of a Hall
reverb.The following steps guide you through the process of creating just that preset in the GNX3.

Select a Preset

The first step to create a preset is to select your starting point. You can start with any preset, but for this
example let's start with Preset 40. Use the Footswitches or the Data Wheel to select Preset 40.

Create a HyperModel™

For this example, we are going to use a vintage Tweed amp with an American 2x12 Cabinet, and warp it with
a Rectified Amp using a British 4x12 cabinet.
1. Select Preset 40. The GNX3 is ready to select the Amp Models (indicated by the Status button's yellow
LED).

Select the Green Channel Amp and Cabinet

The LEDs next to the Parameter 1 and Parameter 2 knobs are green indicating you can select the Amp
and Cabinet types for the Green Channel. To assign the vintage Tweed amp to the Green Channel, do the
following:
1. Rotate the Parameter 1 knob until the display reads
2. Rotate the Parameter 2 knob until the display reads

Select the Red Channel Amp and Cabinet

The LEDs next to the Parameter 4 and Parameter 5 knobs are red indicating you can select the Amp and
Cabinet types for the Red Channel.To assign the Rectified amp to the Red Channel, do the following:
1. Rotate the Parameter 4 knob until the display reads
2. Rotate the Parameter 5 knob until the display reads
30
TWEED
(Tweed).
AMer2X12
(American 2x12).
rectfied
(Rectified).
BRit4X12
(British 4x12).