Whammy Effects - DigiTech Whammy DT Owner's Manual

Effects
The Whammy DT is a powerful pitch shifting pedal that o ers both Drop and Raised re-tuning of
your instrument and classic Whammy pitch bending e ects simultaneously. The left side of the pedal
allows you to select from one of the traditional Whammy e ects: Whammy, Harmony and Detune;
the Expression Pedal will then control the bend of the selected Whammy e ect. The right side of the
pedal interface controls the Drop Tuning (Shift Down) and Raised Tuning (Shift Up) options.

Whammy Effects

This group of e ects will bend your incoming signal either up or down depending upon the e ect set-
ting you have chosen. As the Expression Pedal is rocked back and forth, the signal will bend from the
original input pitch (toe up), to the pitch speci ed by the selected e ect setting (toe down). This e ect
can be used in combination with the Drop Tune e ect. Whammy e ects include:
2 OCT UP – Bends your input note two octaves up.
1 OCT UP – Bends your input note one octave up.
5TH UP – Bends the input note 7 semitones (5th interval) up.
4TH UP – Bends the input note 5 semitones (4th interval) up.
2ND DN – Bends the input note 2 semitones (2nd interval) down.
4TH DN – Bends the input note 5 semitones (4th interval) down.
5TH DN – Bends the input note 7 semitones (5th interval) down.
1 OCT DN – Bends your input note one octave down.
2 OCT DN – Bends your input note two octaves down.
DIVE BOMB – Bends your input note three octaves down.